本网站使用cookie,继续浏览即表示您同意我们使用cookies。更多有关cookies的管理政策,请参阅隐私政策

质量工程师

  • 某外资汽车零部件
  • 苏州 
  • 面议
  • 大专
分享

关于客户

苏州某外资汽车零部件,公司稳定,业务良好

职位描述

  • Coordinates, organizes, supervises, and controls following Sub processes:
    -
    Quotation Phase
    1. Coordinate to prepare test list and measurement fixture list to support inquiry
    2. Responsible for Feasibility study (Dimension, Test...)during RFQ phase
    3. Support for SCR and customer design reviews during RFQ phase
    4. Coordinate to prepare test plan and measurement plan

    Project development phase: Customer, Supplier and Internal Complaints
    5. Handles customer; decides about corrective actions; cooperates with root cause analysis and verifies corrective actions;
    6. Identifies/verifies new or changed customer requirements within scope of responsibility and passes information on to Quality Manager (in cooperation with BD, SM, DE, and QM).
    7. Implements new or changed customer requirements into the organization in cooperation with QM
    8. Controls and/or supervises the compliance with customer requirements (in cooperation with BD, QM, MAN)
    9. Initiates corrective actions in case of deviations from Specifications (e.g. corrections, arrangement with customer releases, stop of production line, etc.)
    10. Evaluates statistical data (SPC, rework & scrap) to determine and maintain quality of products

    Project development phase: Planning, controlling, and assuring product and process quality
    11. Negotiates quality related agreements during APQP and PPAP processes with customers.
    12. Prepares and updates quality related customer specific and internal documents for APQP and PPAP (e.g., flow charts, control plan, FMEA, MSA, dimensioning report, SPC, etc.) and introduce it to the involved employees; verifies and approves PPAPs, dimensional reports, and capability studies
    13. Supports and sets up quality related agreements during APQP and PPAP processes with suppliers
    14. Working with Project team (ENG, PM, TSM, SQE, PIE…) to improve product quality during development phase
    15. Supporting for development measuring/testing equipment for project, including dummy’s
    16. Cooperates and supports QC team with Layout and Inspection of parts
    17. Sets up, coordinates, and controls rework operations for merchandise parts; supports the set up, coordination and control of rework operations for production parts in accordance with MAN; decides and approves product quality
    18. Supporting for maintains up to date equipment in Quality Control Department, including maintaining quality control related documents.
    19. Create product training with PM and ENG
    20. Coordinate transfer project to QE team for in process control after get PPAP approved

    Series production phase: Supporting in process quality control
    21. Provide technical support for complex quality issue analysis during series production
    22. Share quality related Lessons learn of project development phase to QE team.

    Quality Audits, reliability, and risk management
    23. Performs internal process audits according to audit plan
    24. Prepares all documents for Process Audits required by our customers in cooperation with Sales, BD
    25. Initiates continuous improvement actions and reports relevant data to Quality Manager for the Management Review process

    Organizational support and Training of others
    26. Supports Quality Technician personnel and Quality Inspectors; in particular ongoing training on VSPC and OGP
    27. Plans and performs required training in regards to new or changed customer requirements in cooperation with QM and QMA
    28. Supports Quality Technician personnel in writing measuring programs for test equipment and designing of fixtures for test equipment (CMM, Zwick, etc.)

    Authority / Power授权/权力:
    The Job incumbent has the authority or the power to赋予该岗位的权力:
    • Decides about stop of production process if parts are non-conforming and QM and MAN are not accessible
    • Negotiates with Suppliers for quality department equipment and investments (Gages, SPC software, CMM software, and gage ordering, etc.)

    Essential Job Functions工作职能:
    Ability to职能:
    1. Handle customer and supplier concerns; lead the warranty management process; decide about corrective actions; cooperate with root cause analysis, and verify corrective actions; NTF implementation if needed.
    2. Identify/verify new or changed customer requirements within scope of responsibility and pass information on to Quality Manager (in cooperation with BD, SM, DE, and QM).
    3. Implement new or changed customer requirements into the organization in cooperation with QM
    4. Control and/or supervise the compliance with customer requirements (in cooperation with BD, QM, MAN)
    5. Initiate corrective actions in case of deviations from Specifications (e.g. corrections, arrangement with customer releases, stop of production line, etc.)
    6. Evaluate statistical data (SPC, rework & scrap) to determine and maintain quality of products
    7. Negotiate quality related agreements during APQP and PPAP processes with customers.
    8. Prepare and update quality related customer specific and internal documents for APQP and PPAP (e.g., flow charts, control plan, FMEA, MSA, dimensioning report, SPC, etc.) and introduce it to the involved employees; verify PPAPs, dimensional reports, and capability studies
    9. Support and set up quality related agreements during APQP and PPAP processes with suppliers
    10. Cooperate and support QT with Layout and Inspection of parts
    11. Set up, coordinate, and control rework operations for merchandise parts; supports the set up, coordination and control of rework operations for production parts in accordance with MAN; decides and approves product quality
    12. Maintain up to date equipment in Quality Control Department, including maintaining quality control related documents.
    13. Perform internal process audits according to audit plan
    14. Approve product audit plans; in particular applies economical reasoning
    15. Prepare all documents for Process Audits required by our customers in cooperation with Sales, BD
    16. Initiate continuous improvement actions and reports relevant data to Quality Manager for the Management Review process
    17. Train Quality Technician personnel and support training Quality Inspectors; in particular ongoing training on VSPC and OGP
    18. Plan and perform required training in regards to new or changed customer requirements in cooperation with QM and QMA
    19. Support Quality Technician personnel in writing measuring programs for test equipment and designing of fixtures for test equipment (CMM, Zwick, etc.)
    20. Work independently and with minimal supervision for long periods of time.
    21. Timely and accurately complete assigned tasks and follow written and oral instructions.
    22. Timely and accurately organize, prioritise, and complete work assignments, including organizational and time-management abilities with minimal supervision and according to assigned deadlines.
    23. Work in a harmonious manner, accept supervision and directions, and interact in a cooperative and professional manner with the Management, co-workers, and internal and external customers, staff, vendors, and contractors.
    24. Follow oral and written instructions.
    25. Maintain a high level of quality work product and output.
    26. Work in a team environment.
    27. Maintain regular and predictable attendance.
    28. Work full-time.
    29. Maintain a professional business appearance and demeanour.
    30. Maintain safe working conditions and perform work in a safe manner.
    31. Other task assigned by Supervisor.





    Physical and mental abilities 身体素质要求:
    1. Hear, see, and talk to effectively communicate in person and by telephone with internal and external customers, including with supervisors, co-workers, vendors, and contractors.
    2. Read and understand written documents and data.
    3. Frequently work on several tasks at the same time within assigned deadlines.
    4. Frequently work rapidly and with intense concentration for long periods of time.
    5. Frequently sit at a desk or workstation for extended periods of time.
    6. Efficiently utilize a personal computer and related software and other office machines/equipment.

任职要求

  • Education and/or Experience/Qualifications教育/经验/技能:
    • Bachelors Degree in Manufacturing and/or Quality Engineer Certification
    • 5 years Quality Engineering or Manufacturing Experience of mechanical or electro/mechanical components
    • Practical experience with APQP, PPAP, FMEA, Control Plan, SPC, and MSA
    • Customer and/or Supplier Quality Experience
    • Experience in Project and Process Management
    • Knowledge of Statistical Process Control (SPC)
    • Knowledge of IATF16949 Standards
    • Experience with team oriented problem-solving methods (8-D method)
    • Knowledge of plastic processing
    • Practical experience with Coordinate Measuring Machine (CMM) including programming
    • Knowledge of statistical and inspection measuring software
    • Experience with Blue print reading and Geometric dimensioning and tolerance
    • Practical experience with managing significant characteristics
    • Knowledge of product liability and product warranty
    • Practical experience with micrometers, callipers, pin gages, master gage blocks, etc.
    • Proficient with Microsoft office tools, knowledge of SAP
    • Strong Communication skills
    • Strong Analytical skills

如果您对于上述职位感兴趣,欢迎您邮件联系iris.sun@fatalent.com 或者来电咨询15252483211

Reference Number: 15252483211

Contact Details: iris.sun@fatalent.com